Supreme Court E-Library
Information At Your Fingertips

  View printer friendly version

Adopted: 29 May 2015
Date Filed: 09 June 2015
REFERENCES:

1. Republic Act No. 9497 Section 35(a)
   
   
2. Philippine Civil Aviation Regulation (PCAR) Part 4
   
   In the interest of public safety, pursuant to PCAR Part 4 and in conformance to the lCAO Standards and Recommended Practices (SARPs), all aircraft owners and/or operators are hereby directed to comply with the requirements of an aircraft identification plate, PCAR Part 4.3.1.11, consistent with the following requirements:
   
   
   1. Material: Fireproof material, stainless steel is preferred but other fireproof material of suitable physical properties may be allowed;
      
   2. Size: Size shall be a minimum of 1-inch x 2-inches or a maximum of 6-inches by 3-inches, depending on the size of the aircraft. Size may differ for each aircraft type;
      
   3. Location: Aircraft identification plate must be located inside the aircraft and near the main entrance door or alongside with the manufacturer’s data plate;
      
   4. Contents: At least the nationality and registration marks;
      
   5. Markings: Machine etched not painted

Further, approval of the above mentioned specifications and the plate’s location is required prior to installation. Aircraft identification plate compliance and conformity inspection will be carried out during original issuance and/or revalidation of Certificate of Registration.

EFFECTlVITY CLAUSE:

This Memorandum Circular shall take effect fifteen (15) days after compliance with the requisite single newspaper publication and a copy filed with the U.P. Law Center - Office of the National Administrative Register.

So ordered. Signed this 28 day of May 2015, CAAP, Pasay City.

(SGD) LTGEN WILLIAM K HOTCHKISS III AFP (RET)
Director General