(NAR) VOL. 6 NO. 2 / APRIL - JUNE 1995
Rule IV of Ministry Order No. 32, Series of 1985 is hereby modified to read as follows:
"Rule IV
Written Estimate of Cost and Authorization Required; Payment Upon Completion
Section 1. No work, repair or service job shall be commenced without a specified written authority or job order contract with its customer indicating the following information on the job order contract:
Section 2. Display of Signboard for Job Authorization - Every accredited enterprises shall install and display in a conspicuous place within the premises of the enterprise for all customers to see a signboard with a minimum size of 1.22 mts. x 1.525 mts. and the statement "TO ALL CUSTOMERS BEFORE SIGNING ANY JOB AUTHORIZATION, THE FOLLOWING MUST BE INDICATED IN THE JOB ORDER FORM:
Section 3. Before any payment for any work, repair or service job, the following information shall be provided in the billing invoice of the customer:
Section 4. Display of Signboard for Payment - Every accredited enterprise shall install and display in a conspicuous place within the premises a signboard with a minimum size of 1.22 mts. x 1.525 mts. and the statement "TO ALL CUSTOMERS BEFORE PAYING FOR ANY AUTHORIZED JOB, THE FOLLOWING MUST BE INDICATED IN THE JOB INVOICE FOR:
SECTION 2. Section 1, Rule VII of Ministry Order No. 32, Series of 1985 is hereby, modified by adding the following:
"Repositioning of right-hand drive trucks/vehicles to left-hand drive shall be included in this classification."
SECTION 3. Section 10 of Department Order No. 69, Series of 1993 is hereby modified by adding the Point System contained in Annex "A"* hereof and the Machinery/Tools/Equipment Requirement Guide for Repositioning of Right Hand Drive Motor Vehicles/Heavy Equipment and the required certified technical personnel, for star ratings:
"D.17 Repositioning:
Machinery/Tools Equipment
Hydraulic Presses
Hoists
Hydraulic Jacks
Toe in Gauges
Oxygen Aceteylene Welding Units
Flaring Tools
Brake Pipe Bending Tools
Power Tools
Torque WrenchesOptional Tools
Steam Cleaners
Crocodile Jacks
Impact Tools
Drill Presses
Wheel Alignment Tester
Brake Testers
Side Slip Testers
Head Lamp Focusing Equipment
Tire dismantling & assembly fixtures
Metal Inert Gas (MIG) Welding
Tungsten Inert Gas (TIG) Welding
SECTION 4. The corresponding fees for this classification shall be the same fees charged for motor vehicle shops per Memorandum Circular No. 15, Series of 1990.
SECTION 5. Repair and service firms undertaking the repositioning of right hand drive vehicles shall be required to satisfy the following minimum requirements in terms of technical personnel:
One (1) Automotive Mechanic
One (1) Automotive Electrician
One (1) Automotive Body Repairman
SECTION 6. These amendatory rules and regulations shall take effect fifteen (15) days after publication in full in two (2) newspapers of general circulation.
Adopted: 19 May 1995